Prof. Wei Guan | Decision-making and Problem-solving | Best Researcher Award

Prof. Wei Guan | Decision-making and Problem-solving | Best Researcher Award

Dalian Maritime University, China

Profile

Scopus

Early Academic Pursuits 🎓

Dr. Guan Wei embarked on his academic journey with a passion for transportation engineering and maritime studies. His early education laid the groundwork for his future endeavors, characterized by excellence and an unwavering commitment to understanding the complexities of marine navigation and communication. His academic milestones include advanced studies in navigation systems, communication technologies, and maritime management. The rigorous training and education he received during his formative years shaped his analytical capabilities and honed his expertise in intelligent vessel operations.

Professional Endeavors âš“

As a professor at Dalian Maritime University, Dr. Guan Wei has played a pivotal role in the development and dissemination of knowledge in transportation engineering. His professional career spans teaching, research, and administrative leadership. Serving as the Deputy Director of the Communication and Navigation Teaching and Research Section at the College of Navigation, he has spearheaded initiatives aimed at advancing marine navigation technologies.

Dr. Guan’s expertise extends beyond academia. He serves as an external expert for integrating the BeiDou Message Service System into the Global Maritime Distress and Safety System (GMDSS), a critical step toward enhancing global maritime safety. His active participation in the formulation and revision of Chinese GMDSS evaluation standards further demonstrates his commitment to improving maritime communication frameworks.

Additionally, his association with the China Traffic Enterprise Management Association as a member of the Green and Intelligent Transportation Expert Group underscores his dedication to sustainable and innovative solutions in transportation.

Contributions and Research Focus 🔬

Dr. Guan Wei’s research is anchored in cutting-edge advancements in intelligent vessel navigation, ship motion control, and artificial intelligence applications in maritime management. His innovative use of deep reinforcement learning to enhance navigation decision-making has set new benchmarks in the field. His work on ship communication and navigation aids has improved the accuracy and reliability of maritime operations, ensuring safer and more efficient sea transportation.

Over the years, Dr. Guan has authored more than 80 research papers published in prestigious journals. His articles delve into critical issues such as the integration of intelligent systems in marine navigation, predictive algorithms for vessel operation, and the application of neural networks in ship control systems. As a reviewer for renowned journals like IEEE Transactions on Intelligent Vehicles and Ocean Engineering, he actively contributes to maintaining the academic rigor of maritime research.

Accolades and Recognition 🏆

Dr. Guan’s exceptional contributions have earned him several accolades. Recognized as a high-level talent by the city of Dalian, he has consistently demonstrated his expertise and leadership in the maritime sector. His active membership in the China Association for Promoting Democracy highlights his commitment to societal development through academic and professional excellence.

Beyond these honors, his inclusion as an external expert for the BeiDou Message Service System showcases the trust and respect he commands in the maritime community. These recognitions reflect his impact not only on the academic front but also on practical maritime advancements.

Impact and Influence 🌍

Dr. Guan’s work has had a profound impact on the maritime industry, influencing both technological advancements and policy frameworks. His leadership in intelligent vessel operations and maritime management has helped shape the future of transportation engineering. His research findings have been instrumental in bridging the gap between theoretical concepts and practical applications, particularly in enhancing maritime safety and efficiency.

His role in advancing the BeiDou Navigation Satellite System exemplifies his influence on global maritime systems. The integration of this system into GMDSS has not only elevated China’s position in maritime technology but also contributed to global safety initiatives.

Legacy and Future Contributions 🌟

Looking ahead, Dr. Guan Wei continues to focus on transformative technologies in transportation engineering. His current research on artificial intelligence applications in maritime operations aims to revolutionize the industry further. With a deep understanding of the challenges and opportunities in the maritime sector, he is poised to lead future innovations.

Dr. Guan’s legacy is one of relentless pursuit of knowledge, impactful research, and dedicated mentorship. As a Ph.D. and M.Sc. supervisor, he has nurtured countless students who now contribute to the maritime industry. His influence extends across academia and the professional world, leaving an indelible mark on transportation engineering and maritime technology.

In sum, Dr. Guan Wei’s career is a testament to the transformative power of dedication, innovation, and leadership. His continued efforts promise to shape the future of intelligent maritime operations, ensuring safety, efficiency, and sustainability for generations to come. 🌊

📝Notable Publications

USV formation navigation decision-making through hybrid deep reinforcement learning using self-attention mechanism

Authors: Cui, Z.; Guan, W.; Zhang, X.

Journal: Expert Systems with Applications

Year: 2024

Autonomous collision avoidance decision-making method for USV based on ATL-TD3 algorithm

Authors: Cui, Z.; Guan, W.; Zhang, X.; Zhang, G.

Journal: Ocean Engineering

Year: 2024

Collision avoidance decision-making strategy for multiple USVs based on Deep Reinforcement Learning algorithm

Authors: Cui, Z.; Guan, W.; Zhang, X.

Journal: Ocean Engineering

Year: 2024

USV Collision Avoidance Decision-Making Based on the Improved PPO Algorithm in Restricted Waters

Authors: Hao, S.; Guan, W.; Cui, Z.; Lu, J.

Journal: Journal of Marine Science and Engineering

Year: 2024

Occupancy grid-based environment sensing for MASS in complex waters

Authors: Sun, S.; Guan, W.; Wang, Y.

Journal: Ocean Engineering

Year: 2024

 

Prof. jun Li | Innovative Leadership |Best Researcher Award

Prof. jun Li | Innovative Leadership |Best Researcher Award

Changzhou TCM Hospital Affiliated to Nanjing University of Chinese Medicine, China

Profile

Orcid

Early Academic Pursuits 📚

Jun Li’s academic journey began with a strong foundation in Traditional Chinese Medicine (TCM). A standout student, he earned the prestigious title of “Outstanding Graduate” from Nanjing University of Chinese Medicine, a testament to his dedication and exceptional performance during his formative years. This recognition not only established Jun Li as a scholar with immense potential but also paved the way for his later success in the field of TCM.

Professional Endeavors 🩺

Currently serving as an Associate Chief Physician at Changzhou TCM Hospital, Jun Li has been instrumental in advancing medical practices and treatments. His expertise in spinal care and minimally invasive techniques has made him a vital member of the Spinal Minimally Invasive Expert Committee of the Chinese Society of Traditional Chinese Medicine. Beyond his clinical roles, Jun Li actively participates in the administrative and strategic development of TCM through his membership in organizations like the Muscle and Bone Maintenance Branch of the Chinese Ethnic Medicine Association and AO Spine.

Jun Li’s leadership extends to the broader integration of TCM with contemporary medical advancements. As an Executive Committee Member of the Integrated Development Branch of Traditional Chinese Medicine of the China Future Research Association, he has worked to bridge traditional practices with modern scientific methodologies, ensuring TCM’s continued relevance and efficacy in modern healthcare systems.

Contributions and Research Focus 🔬

Jun Li’s research efforts are highlighted by his participation in projects like the Changzhou Municipal Health Commission Science and Technology Research Project (No. ZD202222). With a citation index exceeding 100, his contributions have resonated deeply within the academic community, reflecting the high impact and value of his work. His research primarily focuses on enhancing spinal care through minimally invasive techniques and integrating traditional Chinese medical practices with innovative treatments, thus addressing both modern healthcare challenges and preserving traditional knowledge.

In addition to his research, Jun Li has authored a book (ISBN available), showcasing his dedication to sharing knowledge and educating the next generation of practitioners in TCM. His work not only underscores his expertise but also reflects his commitment to elevating the standards of medical education and practice.

Accolades and Recognition 🏆

Jun Li’s accomplishments have earned him numerous accolades. He was selected as one of the first young talents under the “361 Talent Training Project” of Changzhou City, an initiative that recognizes and supports emerging leaders in their respective fields. He has also received the “Health Commission Award of Changzhou City” multiple times, underscoring his consistent excellence and contribution to public health.

Moreover, Jun Li holds the title of “Top Ten Young Physicians” at Changzhou TCM Hospital, further reflecting his outstanding performance and dedication to his profession. These honors, along with his leadership roles in various professional organizations, highlight his commitment to advancing TCM both locally and nationally.

Impact and Influence 🌟

Jun Li’s influence extends beyond his immediate professional circle. His leadership roles in prominent TCM organizations have enabled him to shape the direction of research and practice in his field. His work has directly impacted the lives of patients through improved treatments and indirectly through the training and mentorship of upcoming professionals. By integrating TCM with innovative techniques, Jun Li has played a pivotal role in enhancing the efficacy and reach of traditional medicine.

Legacy and Future Contributions 🌱

Looking ahead, Jun Li is poised to continue making significant contributions to the field of TCM. His work in minimally invasive techniques and spinal care is likely to yield further advancements, offering improved outcomes for patients worldwide. As a researcher and educator, Jun Li is committed to fostering the next generation of TCM professionals, ensuring that the rich heritage of traditional medicine is preserved while embracing modern innovations.

Jun Li’s legacy is one of dedication, innovation, and leadership. His journey serves as an inspiration for young professionals in the medical field, exemplifying the balance between honoring tradition and embracing progress. With a strong track record of achievements and a vision for the future, Jun Li is set to leave a lasting impact on the world of Traditional Chinese Medicine.

📝Notable Publications

 

Dr. Junjie Gong | Innovative Leadership | Best Researcher Award

Dr. Junjie Gong | Innovative Leadership | Best Researcher Award

Guangxi University, China

Profiles 

Early Academic Pursuits 🌱

Junjie Gong’s academic journey began with a deep-rooted interest in mechanical engineering. Born in 1995, he pursued his undergraduate studies at Wuhan Polytechnic University, earning a Bachelor of Science degree in mechanical manufacturing and its automation in 2018. His academic foundation laid the groundwork for his evolving research aspirations. Demonstrating a keen interest in advancing his expertise, he embarked on a Ph.D. program in mechanical engineering through a joint cultivation initiative involving Guangxi University in Nanning and Zhejiang University in Hangzhou. This unique collaboration provided him with a multifaceted learning environment, combining theoretical insights and practical applications.

Professional Endeavors and Research Focus 🚀

Junjie Gong’s research endeavors span a wide spectrum of innovative domains, including nonlinear system control, motion control of autonomous vehicles, vehicle system dynamics, and mechanical dynamics. His meticulous approach to research has positioned him as a promising scholar in the field of mechanical engineering. Gong has collaborated extensively with the LiuGong Global R&D Center in Guangxi, China, contributing to the development of cutting-edge hydraulic excavators. This partnership signifies his ability to bridge academia and industry, underscoring his commitment to applying theoretical knowledge to solve real-world engineering challenges.

Contributions to Science and Engineering 📚

Gong’s scholarly output includes 10 publications in renowned scientific journals indexed in SCI and Scopus, reflecting the high impact and relevance of his research. In addition to his role as an author, he has contributed to the academic community by serving as a peer reviewer for journals, ensuring the quality and integrity of scientific discourse. His research has gained recognition through its citation index, which currently stands at eight—a testament to the influence and applicability of his findings. Beyond academia, Gong has demonstrated an innovative spirit by securing 11 authorized Chinese patents, with an additional five patents under examination. These patents highlight his ingenuity and commitment to advancing mechanical engineering technologies.

Accolades and Recognition 🏅

While Junjie Gong has yet to receive formal professional memberships or editorial appointments, his accomplishments in patent innovation and academic publications speak volumes about his dedication and talent. His ability to lead research projects and publish extensively at a young age is a remarkable achievement. His collaborative efforts with industry further amplify his profile, positioning him as a rising star in the mechanical engineering domain.

Impact and Influence 🌟

Gong’s collaborative work with LiuGong Global R&D Center has significantly impacted the field of hydraulic excavators, particularly in enhancing their motion control systems and mechanical dynamics. By integrating his research into industrial applications, Gong has contributed to technological advancements that improve efficiency, safety, and reliability. His work in nonlinear system control and path planning is particularly relevant in the era of autonomous vehicles, offering solutions to complex challenges in navigation and system stability.

Legacy and Future Contributions đź”®

Junjie Gong’s academic journey is just beginning, yet his contributions have already left a mark on the field of mechanical engineering. As he progresses in his Ph.D. studies, his research is poised to address more complex challenges in motion control and mechanical dynamics. Gong’s ability to innovate, coupled with his collaborative approach, positions him as a thought leader in his field. His future endeavors are likely to expand into interdisciplinary areas, merging mechanical engineering with emerging technologies such as artificial intelligence and robotics.

📝Notable Publications

Research on the residual vibration suppression of a controllable mechanism robot

Authors: J. Gong, G. Cai, W. Wei, K. Zhang, S. Peng

Journal: IEEE Access

Year: 2022

Kinematic performance analysis of a controllable mechanism welding robot with joint clearance

Authors: J. Gong, W. Wei, G. Cai, Y. Liu, S. Peng

Journal: MATEC Web of Conferences

Year: 2020

Path-Tracking Cascade Control of Hydraulic-Tracked Vehicles Based on Port-Controlled Hamiltonian Model

Authors: J. Gong, S. Guo, H. Shen, W. Wei, Y. Long

Journal: IEEE Transactions on Intelligent Vehicles

Year: 2024

Finite Element Model of Kinematic Pair Clearances of Elastic Linkage Mechanisms

Authors: G. Cai, J. Gong, S. Peng, W. Wei

Journal: Journal of Physics: Conference Series

Year: 2023

Analytical Formula of Positive Position Solution of 2PPa-PSS 3-Translational Parallel Mechanism with Low Coupling-degree and its Numerical Application

Authors: J. Gong, W. Wei, S. Peng, K. Zhang

Journal: Jordan Journal of Mechanical & Industrial Engineering

Year: 2021

Dr. Chaohua Yang | Servant Leadership | Best Researcher Award

Dr. Chaohua Yang | Servant Leadership | Best Researcher Award

The Affiliated Hospital of Southwest Medical University, China

Profile 

Scopus

Early Academic Pursuits 🌱

Chaohua Yang’s academic journey began with a strong foundation in medicine and research, reflecting his commitment to addressing critical healthcare challenges. After earning his medical degree from The Affiliated Hospital of Southwest Medical University in 2012, Yang pursued a Master of Science (MS) degree at Fudan University, graduating in 2017. This rigorous program allowed him to deepen his expertise in medical science and laid the groundwork for his future research. His thirst for knowledge led him to Chongqing Medical University, where he obtained an MD degree in 2023, focusing on spinal cord injury and stem cell research. These academic milestones are a testament to his dedication and pursuit of excellence in the medical field.

Professional Endeavors 🚀

Yang’s professional career has been primarily associated with The Affiliated Hospital of Southwest Medical University, where he began working in 2007. His role as an Attending Physician underscores his commitment to patient care and medical excellence. Between 2017 and 2020, he balanced his clinical responsibilities with his academic pursuits, earning an MS from Fudan University. Since 2023, Yang has rejoined The Affiliated Hospital, where he continues to make significant contributions to both clinical practice and medical research. His dual role as a clinician and researcher enables him to bridge the gap between theoretical advancements and their practical applications in healthcare.

Contributions and Research Focus 📚

Chaohua Yang’s research is primarily focused on spinal cord injury and stem cells, two critical areas in medical science. His contributions are substantial, with 16 publications in high-impact journals indexed in SCI and Scopus. These publications highlight his commitment to advancing knowledge in regenerative medicine and his ability to tackle complex medical challenges. Yang’s work has garnered significant attention in the academic community, as evidenced by his impressive citation index of 122, reflecting the relevance and influence of his research.

In addition to his publications, Yang has authored one book, further solidifying his role as a thought leader in his field. His innovative spirit is evident in his patent portfolio, which includes 156 published or under-process patents. These patents underscore his dedication to developing cutting-edge solutions for spinal cord injury and related medical challenges. His ability to translate research into practical applications demonstrates a rare blend of academic rigor and inventive thinking.

Accolades and Recognition 🏅

While Yang’s accolades are primarily reflected in his extensive research output and patent achievements, his contributions have also been recognized through the successful completion of five research projects. These projects, spanning both basic and applied research, have positioned him as a key figure in his domain. His achievements in publishing, patenting, and research completion highlight his ability to drive innovation and impact in regenerative medicine and spinal cord research.

Impact and Influence 🌟

Chaohua Yang’s work has a profound impact on both the academic and medical communities. His research on spinal cord injury and stem cells addresses some of the most pressing challenges in modern medicine, offering hope to patients with debilitating conditions. The practical implications of his work are significant, ranging from improving clinical outcomes for patients to advancing the field of regenerative medicine. By focusing on both research and clinical applications, Yang has established himself as a bridge between laboratory discoveries and patient care.

His extensive patent portfolio is particularly noteworthy, as it reflects his ability to translate innovative ideas into tangible solutions. These patents not only enhance the body of knowledge in medical science but also have the potential to revolutionize treatment approaches for spinal cord injuries. Yang’s contributions extend beyond academia, influencing industry practices and setting new benchmarks for innovation in healthcare.

Legacy and Future Contributions đź”®

As an Attending Physician and a dedicated researcher, Chaohua Yang’s legacy is one of innovation, impact, and excellence. His extensive research on spinal cord injury and stem cells is paving the way for groundbreaking treatments that could transform the lives of countless patients. Moving forward, Yang is likely to expand his research into interdisciplinary areas, exploring the integration of advanced technologies like bioengineering and artificial intelligence in regenerative medicine.

Yang’s future contributions are poised to leave a lasting impact on medical science and patient care. His ability to innovate, combined with his clinical acumen, positions him as a leader in the field of regenerative medicine. As he continues to explore new frontiers, Yang’s work promises to inspire future generations of medical professionals and researchers.

Conclusion 🌟

Chaohua Yang’s journey is a remarkable blend of academic excellence, professional dedication, and innovative research. From his early academic pursuits to his current role as an Attending Physician, he has consistently demonstrated a commitment to advancing medical science and improving patient care. With a strong focus on spinal cord injury and stem cell research, Yang’s contributions have already made a significant impact on the field. His future endeavors are sure to solidify his legacy as a pioneer in regenerative medicine, inspiring others to follow in his footsteps.

📝Notable Publications

RARRES2 is involved in the “lock-and-key” interactions between osteosarcoma stem cells and tumor-associated macrophages

Authors: Ma, J.; Chen, Z.; Li, Q.; Yang, C.; Quan, Z.

Journal: Scientific Reports

Year: 2024

A GAD1 inhibitor suppresses osteosarcoma growth through the Wnt/β-catenin signaling pathway

Authors: Jian, C.; Wang, B.; Mou, H.; Huang, Q.; Ou, Y.

Journal: Heliyon

Year: 2024

Is local autogenous morselized bone harvested from decompression through a posterior-transforaminal approach sufficient for single-level interbody fusion in the lower lumbar spine?

Authors: Yang, J.; Yang, Y.; Wang, G.; Wang, S.; Wang, Q.

Journal: BMC Musculoskeletal Disorders

Year: 2023

LncRNA DGCR5-encoded polypeptide RIP aggravates SONFH by repressing nuclear localization of β-catenin in BMSCs

Authors: Jiang, W.; Chen, Y.; Sun, M.; Chen, T.; Zhang, J.

Journal: Cell Reports

Year: 2023

Capsaicin Reduces Cancer Stemness and Inhibits Metastasis by Downregulating SOX2 and EZH2 in Osteosarcoma

Authors: Chen, Z.-Y.; Huang, H.-H.; Li, Q.-C.; Zhang, Y.; Quan, Z.-X.

Journal: American Journal of Chinese Medicine

Year: 2023

 

 

 

Dr. Mohammed Echarif AGUIDA | Electrical engineering | Best Innovation Award| 3429

Prof. Danping Huang | Strategic Leadership | Best Researcher Award

sichuan university of science and engineering, China

Tianjin university, China

Profile 

Scopus

Early Academic Pursuits 🎓

Danping Huang’s academic journey commenced with a Ph.D. from Sichuan University, laying the foundation for an illustrious career in machine vision and artificial intelligence. During his doctoral studies, he delved into advanced sensing and signal processing technologies, acquiring the expertise required to address complex challenges in automation and industrial detection. This rigorous academic background equipped him with a strong theoretical foundation and practical skills to pioneer research in high-speed online real-time measurement systems.

Professional Endeavors and Contributions 🛠️

As the Director of the High-Speed Machine Vision Team at Sichuan University of Science and Engineering, Dr. Huang has made significant strides in cutting-edge research and innovation. His work encompasses:

  • Machine Vision Systems: Developing state-of-the-art technologies for defect detection, real-time monitoring, and quality assurance in industrial applications.
  • Artificial Intelligence Integration: Innovating intelligent algorithms that enable machines to learn and adapt, optimizing performance in real-time.
  • Non-Destructive Testing (NDT): Pioneering advancements in NDT using machine vision to ensure product integrity and reduce waste in manufacturing processes.

Dr. Huang’s solutions have addressed practical production challenges for numerous enterprises, enhancing efficiency and gaining widespread industry recognition. With over 50 completed and ongoing research projects, his impact spans both academic and industrial domains.

Research Focus and Innovations 🔬

Dr. Huang’s research primarily focuses on:

  • High-Speed Online Measurement: Designing and implementing robust systems for rapid, precise, and automated inspections in dynamic industrial environments.
  • Deep Learning Applications: Developing deep learning algorithms to enhance the accuracy and speed of optical cable defect detection. His groundbreaking paper, “Online defect detection method of optical cable pitch based on machine vision technology and deep learning algorithms,” published in Optics and Laser Technology (2024), exemplifies this innovation.
  • Signal Processing and Automation: Enhancing sensing and detection technologies to revolutionize industrial operations.

Accolades and Recognition 🏆

Dr. Huang’s work has been widely acknowledged, earning accolades for his contributions to both academia and industry. He has published over 50 research articles in prestigious SCI and Scopus-indexed journals, and his work has become a cornerstone for innovation in machine vision. Beyond publications, he holds 20 patents—many of which address pivotal issues in automation and intelligent systems.

Additionally, his consultancy has impacted 20 major industry projects, where he worked closely with enterprises to tailor solutions that improve production processes and operational efficiencies. Notably, he has also been involved in the National Minimum Flow Measurement Project, underscoring his contributions to critical national initiatives.

Impact and Influence 🌟

Dr. Huang’s research has far-reaching implications, addressing both theoretical advancements and practical applications. His innovations in machine vision have not only improved production accuracy but also elevated the standards for quality control across multiple industries. His interdisciplinary approach bridges gaps between artificial intelligence, signal processing, and automation, paving the way for the next generation of intelligent manufacturing systems.

Through his work, he has mentored countless graduate students and researchers, fostering a new wave of talent in the fields of AI and machine vision. His collaborations with industries have translated academic research into tangible benefits, solidifying his position as a leader in applied technological innovation.

Legacy and Future Contributions 🌍

Looking ahead, Dr. Huang envisions a future where machine vision systems seamlessly integrate with AI to revolutionize industries globally. His ongoing research on high-speed real-time measurements aims to further enhance industrial efficiency, while his commitment to mentorship ensures the sustained growth of expertise in his field.

Dr. Huang’s legacy is defined by his relentless pursuit of excellence, impactful research, and unwavering dedication to solving real-world problems. As a trailblazer in high-speed machine vision and artificial intelligence, he continues to inspire innovation and drive meaningful progress in both academia and industry.

In summary, Danping Huang exemplifies how focused research, practical applications, and visionary leadership can collectively transform industries and inspire future generations. His contributions will undoubtedly leave a lasting imprint on the fields of machine vision and intelligent automation.

📝Notable Publications

Online defect detection method of optical cable pitch based on machine vision technology and deep learning algorithms

Authors: Gou, S.; Huang, D.; Liao, S.; Liu, L.; Wen, X.

Journal: Optics and Laser Technology

Year: 2024

Simulation of photon-generated carrier transport characteristics in CdSe quantum dot thin films

Authors: Zheng, F.; Zhu, H.; Huang, Y.; Wu, Y.; Liu, J.

Journal: International Journal of Modern Physics C

Year: 2023

Inversion prediction of COD in wastewater based on hyperspectral technology

Authors: Huang, D.; Tian, Y.; Yu, S.; Zhen, J.; Chen, X.

Journal: Journal of Cleaner Production

Year: 2023

Combination of Spectral and Spatial Information of Hyperspectral Imaging for the Prediction of the Moisture Content and Visualizing Distribution in Daqu

Authors: Sun, T.; Hu, X.; Tian, J.; Luo, H.; Huang, D.

Journal: Journal of the American Society of Brewing Chemists

Year: 2023

Optimization of Molding Process of Daqu’s Multi Position Press

Authors: Gao, J.; Tian, J.; Wang, K.; Huang, D.; Wu, X.

Journal: Science and Technology of Food Industry

Year: 2022

 

 

 

Prof. Danping Huang | Strategic Leadership | Best Researcher Award

Prof. Danping Huang | Strategic Leadership | Best Researcher Award

sichuan university of science and engineering, China

Tianjin university, China

Profile 

Scopus

Early Academic Pursuits 🎓

Aguid Mohammed Echarif’s journey into the field of electrical engineering began with a strong academic foundation at UniversitĂ© M’hamed Bouguerra de Boumerdes in Algeria. He earned his bachelor’s degree in Electrical Engineering and Electronics (2012–2015), showcasing his aptitude for technical subjects and problem-solving skills. Building on this, he pursued a master’s degree in Control Engineering (2015–2018) at the same institution, where he gained expertise in automation, control systems, and advanced electrical concepts. During his university years, Aguid demonstrated a keen interest in practical learning, participating in internships that exposed him to real-world applications of electrical engineering.

His academic ambitions did not stop there. In 2020, Aguid embarked on a prestigious Ph.D. program at Tianjin University in China, delving into advanced research in power electrical systems for more electric aircraft. This pursuit reflects his commitment to addressing modern engineering challenges, particularly in sustainable and energy-efficient technologies.

Professional Endeavors and Contributions ⚡

Aguid has accumulated over four years of professional experience as an electrical engineer, with a strong focus on electrical systems design, troubleshooting, and team leadership. His career began at Agro-Film Packaging in Sétif, where he worked from October 2018 to January 2023. In this role, he was instrumental in:

  • Troubleshooting and resolving electrical faults to ensure uninterrupted operations.
  • Designing and maintaining electrical systems and equipment, ensuring their efficiency and reliability.
  • Creating and interpreting diagrams and instructions for electrical panels and equipment.
  • Programming and installing PLCs (Programmable Logic Controllers) and Variable Frequency Drives (VFDs) to optimize system performance.
  • Leading installation teams for new machinery, ensuring projects were completed on time and met quality standards.

His ability to lead teams in high-pressure environments while maintaining precision and quality underscores his strong leadership and collaborative skills.

Research Focus 🔍

As a Ph.D. candidate at Tianjin University, Aguid’s research centers on power electrical systems for more electric aircraft, a cutting-edge field aiming to revolutionize aviation through sustainable and efficient power solutions. His work involves exploring innovative designs and methodologies that reduce reliance on traditional fuel systems, paving the way for a greener and more sustainable aviation industry. This research aligns with global efforts to minimize carbon footprints and transition to cleaner energy sources.

Accolades and Recognition 🏆

Aguid’s academic and professional accomplishments have earned him recognition as a dedicated and innovative engineer. While specific awards are not listed, his admission into a prestigious Ph.D. program at one of China’s leading universities is a testament to his academic excellence and potential. His ability to balance demanding research with a successful professional career demonstrates his exceptional time management and organizational skills.

Impact and Influence 🌍

Aguid has made significant contributions to the engineering community through his practical expertise and research endeavors. At Agro-Film Packaging, his leadership in troubleshooting, system design, and team management directly impacted operational efficiency and productivity. His efforts in designing Human-Machine Interfaces (HMIs) and programming advanced control systems highlight his ability to bridge the gap between technical complexity and user-friendly solutions.

In academia, his research on electrical systems for aircraft could influence the development of more sustainable technologies in the aviation industry, potentially setting benchmarks for energy efficiency and innovation.

Legacy and Future Contributions 🌟

Looking ahead, Aguid is poised to leave a lasting legacy in both the industrial and academic spheres. His ability to combine practical engineering skills with advanced research positions him as a leader in the development of sustainable electrical systems. His work not only addresses current engineering challenges but also lays the groundwork for future innovations in aviation and beyond.

As he continues to build on his expertise, Aguid Mohammed Echarif is expected to play a pivotal role in driving technological advancements and mentoring the next generation of engineers. His journey exemplifies the fusion of academic brilliance, professional acumen, and a vision for a sustainable future.

Closing Thoughts 🌟

From his early academic achievements to his professional and research endeavors, Aguid has consistently demonstrated a passion for engineering and innovation. His ability to navigate complex challenges with creativity and technical proficiency makes him a standout figure in the field of electrical engineering.

📝Notable Publications

 Torque Ripple Suppression in the 6/4 Variable Flux Reluctance Machine with Open Winding Configuration by Using Harmonic Injection

Authors: Liu, X.; Aouiche, E.M.; Aouiche, A.; Cao, Y.; Aguida, M.E.

Journal: Energies

Year: 2024

 Technological Advancements and Future Prospects of Electrical Power Systems for Sustainable More Electric Aircraft

Authors: Aguida, M.E.; Che, Y.; Yang, J.

Journal: Propulsion and Power Research

Year: 2024

 

Assist Prof Dr. Yohannes Seifu Berego | Wastewater Treatment | Best Researcher Award

Assist Prof Dr. Yohannes Seifu Berego | Wastewater Treatment | Best Researcher Award

Hawassa University, Ethiopia

Profile 

Google Scholar

Early Academic Pursuits 📚

Dr. Yohannes Seifu Berego’s academic journey began in his home city of Hawassa, Ethiopia, where he completed his early education at the Adventist School in Hawassa City. After excelling in his elementary and junior schooling, Dr. Yohannes proceeded to the Hawassa Daniel Comboni Comprehensive High School, laying the foundation for his future academic and professional success.

After completing his secondary education, Dr. Yohannes enrolled at Hawassa University, where he earned a B.Sc. in Medical Laboratory Sciences in 2010. His early academic pursuits demonstrated an affinity for science, particularly in health-related fields, which would later play a central role in his career. His strong academic performance and dedication to his studies led him to pursue higher degrees at the same institution, marking the beginning of his path into environmental science and health.

Professional Endeavors 🏆

Upon completing his B.Sc., Dr. Yohannes continued his academic journey at Hawassa University, further expanding his knowledge and expertise. He earned a Master’s degree in Ecotoxicology and Environmental Health in 2017, where his research centered on understanding the impact of pollutants on ecosystems and human health. During this time, he began developing a passion for environmental toxicology and wastewater management, two fields that would define his career.

In 2019, Dr. Yohannes broadened his skillset by completing a General Master’s in Public Health, which provided him with a wider lens on health issues and the relationship between human health and environmental factors. This dual focus on environmental health and toxicology led to his PhD in Environmental Toxicology, which he is currently pursuing at Hawassa University, with a particular focus on the treatment of agro-industrial wastewater from coffee berry processing.

Dr. Yohannes’ professional endeavors have been deeply intertwined with his academic roles. He currently serves as an Assistant Professor in the Department of Environmental Health at Hawassa University, where he teaches, mentors, and supervises graduate students. In addition to his teaching responsibilities, Dr. Yohannes has been entrusted with the role of Chairperson of Academic Standards and Quality Assurance at Hawassa University since August 2024, further solidifying his leadership within the academic community.

Contributions and Research Focus 🌍

Dr. Yohannes has made significant contributions to the field of environmental health, particularly in the areas of water and wastewater management, climate change, air pollution, healthcare, hazardous waste management, and environmental economics. His research interests have always centered around understanding the detrimental effects of pollution on both the environment and public health. As part of his PhD project, Dr. Yohannes is investigating the potential of constructed and natural wetlands for the treatment of wastewater generated by the coffee berries processing agro-industry. This study addresses a critical issue in Ethiopia, where coffee production is a major industry, but wastewater disposal remains a major environmental challenge.

Dr. Yohannes’ passion for improving public health through the development of low-cost sanitation technologies and pollution remediation strategies is evident in his research. His work has also expanded to environmental monitoring and the prevention of environmental pollution. His academic contributions have had far-reaching impacts on communities, particularly in the areas of water pollution control, sustainable waste management, and mitigation of climate change effects.

In addition to his individual research projects, Dr. Yohannes has collaborated with colleagues on more than 30 research articles published in peer-reviewed journals. His ability to work collaboratively on interdisciplinary research projects has been a hallmark of his academic career, and he has co-supervised seven Master’s theses and one Ph.D. student, contributing to the academic growth of the next generation of environmental scientists.

Accolades and Recognition 🏅

Throughout his academic and professional journey, Dr. Yohannes has earned recognition for his dedication and contributions to the field of environmental health. Notably, he has received more than two grants from national and international funding organizations for projects related to water and wastewater treatment. These grants not only reflect the relevance and quality of his research but also highlight his ability to attract funding for impactful scientific projects.

Additionally, his role as a mentor to graduate students and his leadership in ensuring academic quality and standards at Hawassa University have earned him respect and recognition within the academic community. His ability to balance research, teaching, and administrative responsibilities has made him a valuable member of the university’s faculty.

Impact and Influence 🌱

Dr. Yohannes’ work has had a significant impact on both local and international levels. In Ethiopia, where water and wastewater management are pressing issues, his research into sustainable treatment technologies offers practical solutions to alleviate environmental pollution and improve public health outcomes. His focus on low-cost sanitation technologies and pollution prevention has helped to address some of the most pressing challenges faced by developing nations.

His research has also influenced the wider academic community by contributing to the growing body of knowledge in the fields of environmental toxicology and ecotoxicology. Dr. Yohannes is a recognized leader in the integration of environmental health and public policy, with his work serving as a guide for future research in sustainable environmental practices.

Legacy and Future Contributions 🌟

As Dr. Yohannes continues his Ph.D. studies, his legacy as an environmental health advocate and researcher is set to grow even further. With a solid foundation of academic excellence, significant research contributions, and a passion for improving the health and well-being of both humans and the environment, Dr. Yohannes is poised to make lasting contributions to the field. His future work will likely focus on the continued development of affordable, sustainable technologies for wastewater treatment and environmental remediation, with a focus on regions with limited access to clean water.

In addition to his research, Dr. Yohannes’ commitment to quality academic standards and mentorship will continue to shape the future of environmental health education at Hawassa University. His dedication to training the next generation of scientists and researchers ensures that his influence will extend well beyond his immediate work, leaving a lasting legacy in the field of environmental toxicology.

Through his research, teaching, and leadership, Dr. Yohannes Seifu Berego is setting the stage for a brighter, healthier, and more sustainable future for Ethiopia and the global community. His work has already made an impact, and his continued contributions will further solidify his role as a leader in the fields of environmental health and toxicology.

📝Notable Publications

Prevalence and Associated Factors of Diabetes Mellitus Among Adult Population in Hawassa Zuria Woreda, Sidama Region, Ethiopia

Authors: Y.H.A.E. Yohannes Seifu Berego, Desalegn Tsegaw Hibstu

Journal: Dove Medical Press

Year: 2020

Treatment Performance Assessment of Natural and Constructed Wetlands on Wastewater from Kege Wet Coffee Processing Plant in Dale Woreda, Sidama Regional State, Ethiopia

Authors: Yohannes Seifu Berego, Sota Solomon Sorsa, Ulsido Mihret Dananto, Beyene …

Journal: Environmental Health Insights

Year: 2022

The Contents of Essential and Toxic Metals in Coffee Beans and Soil in Dale Woreda, Sidama Regional State, Southern Ethiopia

Authors: Yohannes Seifu Berego, Sota Solomon Sorsa, Ulsido Mihret, Beyene Embialle …

Journal: PeerJ

Year: 2023

The Magnitude and Associated Factors of Consistent Condom Utilization Among ART Users in Hawassa City, Sidama, Ethiopia

Authors: A.E. Biruk Tesfaye, Yohannes Seifu Berego, Bereket Tekleselassie

Journal: Dove Medical Press

Year: 2020

Concentration of Heavy Metals in Drinking Water of Hawassa Zuria Woreda, Sidama Region, Ethiopia

Authors: Yohannes Seifu Berego, Sota Solomon Sorsa, Ulsido Mihret Dananto, Beyene …

Journal: Ethiopian Journal of Medical and Health Sciences

Year: 2021

 

 

Dr. Mohammed Echarif AGUIDA | Electrical engineering | Best Innovation Award

Dr. Mohammed Echarif AGUIDA | Electrical engineering | Best Innovation Award

Tianjin university, China

Profile 

Scopus

🎓 Early Academic Pursuits

Aguilda Mohammed Echarif began her academic journey with a Bachelor’s degree in Electrical Engineering and Electronics from UniversitĂ© M’hamed Bouguerra de Boumerdes, Algeria, in 2015. Her undergraduate years were marked by a strong foundation in electrical systems, electronic components, and control engineering principles. Motivated to deepen her expertise, she pursued a Master’s degree in Control Engineering at the same university, completing it in 2018. This advanced education equipped her with specialized knowledge in control systems, automation, and system optimization. Aguilda demonstrated exceptional academic prowess and a keen interest in applying theoretical knowledge to practical challenges. Her academic endeavors laid the groundwork for a promising career in electrical engineering.

đź’Ľ Professional Endeavors

Aguilda’s professional career commenced in October 2018 as an Electrical Engineer at Agro-Film Packaging in Sétif, Algeria. Over five years, she gained extensive experience in electrical system design, installation, troubleshooting, and maintenance. Aguilda showcased her expertise in diagnosing electrical faults and proposing effective solutions, ensuring the seamless operation of electrical systems and equipment. She demonstrated proficiency in reading and writing complex diagrams, programming installation PLCs (Programmable Logic Controllers), and designing Human-Machine Interfaces (HMI). Her leadership skills were evident as she successfully led installation teams, planned projects, and ensured timely completion of machine setups.

Her professional contributions extended beyond technical expertise; she excelled in team collaboration, efficient problem-solving, and maintaining operational excellence. Aguilda’s dedication to her work not only enhanced system reliability but also optimized project execution.

🔬 Contributions and Research Focus

As a Ph.D. candidate at Tianjin University, China, Aguilda is delving into cutting-edge research in the power electrical systems of More Electric Aircraft (MEA). This pioneering field aims to replace conventional hydraulic and pneumatic systems in aircraft with advanced electrical systems, enhancing efficiency, sustainability, and performance. Aguilda’s research focuses on developing innovative solutions to address challenges in power distribution, energy storage, and system reliability within MEA designs.

Her expertise in control engineering, coupled with her experience in programmable logic controllers and variable frequency drives, enables her to contribute significantly to advancements in the aviation industry. Aguilda’s research is poised to drive technological breakthroughs, promoting eco-friendly and energy-efficient aviation solutions.

🏆 Accolades and Recognition

Throughout her academic and professional journey, Aguilda has received recognition for her exceptional skills and contributions. Her ability to work under pressure, lead teams, and solve complex engineering problems has earned her accolades from peers and supervisors alike. Her participation in internships with renowned organizations such as NAFTAL, ENEI, and Algérie Telecom further honed her skills and established her as a competent and reliable professional.

At NAFTAL, Aguilda worked on understanding and testing automatic fuel distribution systems in airports, showcasing her proficiency in automation. At ENEI, she gained hands-on experience in repairing and testing the power components of TVs. Her internship at Algérie Telecom involved monitoring and repairing electronic devices, emphasizing her versatility and adaptability.

🌍 Impact and Influence

Aguilda’s work has had a profound impact on the organizations she has been a part of. At Agro-Film Packaging, her contributions to electrical system maintenance and new machine installations improved operational efficiency and reduced downtime. Her leadership in project planning and execution ensured the timely completion of critical installations, enhancing productivity and reliability.

In the academic sphere, her research on More Electric Aircraft has the potential to revolutionize the aviation industry by promoting sustainable practices and reducing environmental impact. Her innovative solutions and technical acumen are influencing the next generation of electrical systems and energy management strategies.

🌟 Legacy and Future Contributions

Aguilda Mohammed Echarif’s legacy lies in her unwavering commitment to advancing electrical engineering and her passion for driving technological progress. As she continues her Ph.D. research, she is poised to make groundbreaking contributions to the aviation sector, paving the way for greener and more efficient aircraft systems.

Her future endeavors will likely include mentoring young engineers, collaborating on international research projects, and contributing to global sustainability efforts. Aguilda’s journey exemplifies the power of dedication, innovation, and collaboration in shaping a brighter future for the engineering world.

With her impressive academic background, professional experience, and visionary research focus, Aguilda is an inspiring figure in the field of electrical engineering, leaving an indelible mark on the industry and beyond. 🌟

📝Notable Publications

Torque Ripple Suppression in the 6/4 Variable Flux Reluctance Machine with Open Winding Configuration by Using Harmonic Injection

Authors: Xu Liu, El Moundher Aouiche, Abdelaziz Aouiche, Yang Cao, Mohammed Echarif Aguida

Journal: Energies

Year: 2024

 

Technological Advancements and Future Prospects of Electrical Power Systems for Sustainable More Electric Aircraft

Authors: Mohammed Echarif Aguida, Ying Che, Junfeng Yang

Journal: Propulsion and Power Research

Year: 2024

 

Assist Prof Dr. Mehtap ATAK | Innovative Leadership | Best Researcher Award

Assist Prof Dr. Mehtap ATAK | Innovative Leadership | Best Researcher Award

Recep Tayyip Erdogan University/Faculty of Medicine/Biochemistry, Rize, Turkey

Profile 

Scopus

🌱 Early Academic Pursuits

Qianwen Zheng’s academic journey is a testament to her passion for excellence in Food Science and Engineering. She began her higher education at Hainan University, where she ranked in the top 1% of her department, achieving a stellar GPA of 3.88/4.00. This accomplishment not only underscored her dedication but also set the stage for her future successes. Her strong foundation enabled her to secure admission to the prestigious South China University of Technology, where she earned her Master’s degree.

Her commitment to academic rigor and her ability to excel in competitive environments became apparent early on. Her transition to China Agricultural University to pursue a Ph.D. in Food Science and Engineering under the mentorship of Professor Xueying Mao marks another milestone in her academic journey. At every stage, her pursuit of knowledge has been guided by a curiosity for solving complex scientific challenges.

🚀 Professional Endeavors

Throughout her career, Qianwen Zheng has been deeply involved in innovative research projects. Her exploration of the hypoglycemic effects of Fucus vesiculosus polysaccharide is a prime example of her ability to link traditional ingredients with modern health solutions.

Her studies in digestion characteristics demonstrate her prowess in blending theoretical frameworks with practical applications. She has adeptly utilized cutting-edge analytical techniques to enhance our understanding of food science. Her professional experiences have solidified her reputation as a meticulous researcher who bridges the gap between science and its societal impact.

📚 Contributions and Research Focus

Qianwen Zheng’s research efforts are focused on functional food components, addressing pressing issues such as metabolic health and dietary optimization. Her studies contribute to the broader goals of improving public health and sustainable food practices.

Her innovative research on the interactions between polysaccharides and human metabolism provides insights into combating diseases such as diabetes. By applying advanced biochemical analyses and experimental methodologies, she has offered practical solutions for improving dietary habits and developing therapeutic foods. These contributions have not only expanded the field of food science but also paved the way for healthier lifestyles.

🏆 Accolades and Recognition

Qianwen Zheng’s dedication has earned her multiple accolades. Notably, she received the Wu Xu Scholarship, a prestigious award that highlights her exceptional academic and research achievements.

These recognitions reflect her unwavering commitment to excellence and serve as motivation to continue pushing the boundaries of food science. Her ability to balance high-level research, rigorous academic pursuits, and impactful outcomes sets her apart in the scientific community.

🌍 Impact and Influence

Qianwen Zheng’s work has far-reaching implications for global health and nutrition. Her studies contribute to solving challenges related to food security, chronic diseases, and sustainable nutrition. By focusing on the interplay between diet and health, she has helped advance the conversation on preventative health care.

Her influence extends beyond her immediate research projects, as she frequently collaborates with fellow scientists and mentors aspiring researchers. This collaborative approach ensures that her knowledge and methods are shared widely, inspiring the next generation of scientists.

✨ Legacy and Future Contributions

Qianwen Zheng’s contributions to food science set the stage for a legacy that combines innovation, collaboration, and education. As she continues her research, she aims to explore novel food components and their role in preventing lifestyle diseases. Her vision for the future involves not only advancing scientific understanding but also ensuring her findings are translated into real-world solutions that benefit communities worldwide.

Her dedication to mentoring young researchers and her commitment to interdisciplinary collaboration ensure that her impact will resonate long after her current projects. Her legacy is one of pioneering solutions that contribute to both the scientific community and society at large.

📝Notable Publications

Handmade Green Tea: Antioxidant Content and Activity

Authors: Atak, M.; Yılmaz Kutlu, E.; Çavuş, D.; Çomoğlu, M.

Journal: Applied Food Research

Year: 2024

Kaempferol Reduces Pyroptosis in Acute Lung Injury by Decreasing ADAM10 Activity Through the NLRP3/GSDMD Pathway

Authors: Yigit, E.; Huner Yigit, M.; Atak, M.; Yildiz, G.; Deger, O.

Journal: Food Bioscience

Year: 2024

Synthetic and Non-Synthetic Inhibition of ADAM10 and ADAM17 Reduces Inflammation and Oxidative Stress in LPS-Induced Acute Kidney Injury in Male and Female Mice

Authors: Atak, M.; Yigit, E.; Huner Yigit, M.; Yilmaz Kutlu, E.; Karabulut, S.

Journal: European Journal of Pharmacology

Year: 2024

Investigation of the Effects of White Tea on Liver Fibrosis: An Experimental Animal Model

Authors: Yılmaz, H.K.; Türker, M.; Kutlu, E.Y.; Tümkaya, L.; Atak, M.

Journal: Food Science and Nutrition

Year: 2024

Long-Term Protective Effects of Lamotrigine in a Rat Ovarian Ischemia-Reperfusion Model

Authors: Aktepe, R.; Ucuncu, Y.; Tumkaya, L.; Uydu, H.A.; Atak, M.

Journal: Tissue and Cell

Year: 2024

Prof Hongfang Zhou | Innovative Leadership | Best Researcher Award

Prof Hongfang Zhou | Innovative Leadership | Best Researcher Award

Xi’an University of Technology, China

Profile 

Scopus

🌟 Early Academic Pursuits

Dr. Zhou Hongfang’s academic journey began with her B.S. and M.S. degrees from Xi’an University of Technology in 1999 and 2002, respectively. Demonstrating exceptional academic prowess and an insatiable thirst for knowledge, she further pursued a Ph.D. at Xi’an Jiaotong University, which she earned in 2006. During her early years, she cultivated a deep interest in artificial computing and data science, laying the foundation for her illustrious career in academia and research.

đź’Ľ Professional Endeavors

Currently a Professor at Xi’an University of Technology, Dr. Zhou has dedicated her career to advancing the fields of artificial computing, heterogeneous information networks, and software theory. Her tenure has been marked by exceptional leadership in completing over 30 research projects, showcasing her ability to drive innovative solutions to complex problems. A distinguished member of the IEEE, Dr. Zhou has continually demonstrated her commitment to fostering interdisciplinary collaborations and mentoring future generations of researchers.

📊 Contributions and Research Focus

Dr. Zhou’s research interests center on data mining and knowledge discovery, with her work encompassing diverse applications and theoretical advancements. She has published over 50 SCI-indexed papers in prestigious journals such as Knowledge-Based Systems, Expert Systems with Applications, and Physica A. Her groundbreaking studies have provided significant insights into the computational complexities of data networks and artificial intelligence applications.

In addition to academic publishing, Dr. Zhou has also made substantial contributions to intellectual property, with 12 patents published and 6 more in progress. These innovations not only showcase her technical expertise but also underline her dedication to practical applications of research in solving real-world challenges.

🏆 Accolades and Recognition

Dr. Zhou’s research has garnered widespread recognition, positioning her as a leader in her field. Her contributions have enriched global academic discourse and informed practices in data science and artificial intelligence. As a recipient of numerous awards and invitations to esteemed conferences, Dr. Zhou’s work has been instrumental in elevating the global profile of her institution and her research field.

🌍 Impact and Influence

Dr. Zhou’s impact extends far beyond academia. Her research results have served as invaluable resources for fellow scholars, researchers, and industry professionals. The methodologies she has developed in heterogeneous information networks and data mining have been widely adopted, influencing both theoretical explorations and practical applications in various industries.

Through her active participation in professional organizations like IEEE, Dr. Zhou has contributed to shaping international standards and fostering collaborations between academia and industry. Her work has inspired countless researchers to pursue excellence in artificial computing and knowledge discovery.

đź“– Legacy and Future Contributions

Looking ahead, Dr. Zhou remains committed to pushing the boundaries of data mining and artificial intelligence. She envisions leveraging emerging technologies like quantum computing and machine learning to tackle global challenges in healthcare, climate science, and beyond. Her ongoing projects aim to bridge gaps between theoretical research and practical implementation, further cementing her legacy as a pioneer in her field.

✨ A Legacy of Excellence

Dr. Zhou Hongfang’s career is a testament to her unwavering dedication, intellectual curiosity, and passion for innovation. Her contributions to data mining, knowledge discovery, and artificial intelligence continue to make a profound impact, inspiring peers and paving the way for future advancements in these critical fields.

📝Notable Publications

PLEKv2: predicting lncRNAs and mRNAs based on intrinsic sequence features and the coding-net model

Authors: Li, A.; Zhou, H.; Xiong, S.; Hei, X.; Wang, L.

Journal: BMC Genomics

Year: 2024

Precise reconstruction of the entire mouse kidney at cellular resolution

Authors: Li, Y.; Cao, J.; Zhang, Q.; Li, A.; Jiang, T.

Journal: Biomedical Optics Express

Year: 2024

Feature selection based on weighted conditional mutual information

Authors: Zhou, H.; Wang, X.; Zhang, Y.

Journal: Applied Computing and Informatics

Year: 2024

PDR-SMOTE: an imbalanced data processing method based on data region partition and K nearest neighbors

Authors: Zhou, H.; Wu, Z.; Xu, N.; Xiao, H.

Journal: International Journal of Machine Learning and Cybernetics

Year: 2023

A diabetes prediction model based on Boruta feature selection and ensemble learning

Authors: Zhou, H.; Xin, Y.; Li, S.

Journal: BMC Bioinformatics

Year: 2023